NCEES-FE : NCEES - FE Civil Engineering 2025 Exam

NCEES-FE Dumps NCEES-FE Braindumps NCEES-FE Real Questions NCEES-FE Practice Test
NCEES-FE Actual Questions
NCEES
NCEES-FE
NCEES - FE Civil Engineering 2025
https://killexams.com/pass4sure/exam-detail/NCEES-FE
Question: 92
A line is measured as 1,200 ft at 98° F. Using a standard tape, what is the true length of the line?
A. 1,197.70 ft
B. 1,199.77 ft
C. 1200.23 ft
D. 1202.30 ft
Answer: C
The true length of a line that is measured as 1,200 ft at 98°F is 1,200.23 using a standard tape. Solution Correction = (steel tape coefficient of expansion)(outside temperature standard temperature)(measured length) Correction = (0.00000645 * 1/°F) (98°F - 68°F) (1,200) = +0.23 ft True length = distance + correction True length= 1,200.00 ft + 0.23 ft = 1,200.23 ft
Question: 93
Which of the following statements expresses Hooke’s Law of simple harmonic motion?
1. Speed of a wave = frequency x wavelength
2. Spring force = -(spring constant x displacement)
3. Average speed = distance traveled / time of travel
4. None of the above
Answer: B
Hooke’s Law of simple harmonic motion can be expressed as spring force = - (spring constant x displacement). Spring force always pushes or pulls a mass towards its original equilibrium position, and as such, is referred to as a restoring force. Hooke’s Law describes the relationship of the restoring force as being directly proportional to the displacement of the mass.
Question: 94
Which of the following sentences provides an example of effective diction?
1. A good writer will only use big words when necessary.
2. The shrewd author will always endorse himself by providing imposing and superlative language.
3. As I struggled to carry my instruments across the vast expanse of the project
area, I paused to reflect on the magnificence of the setting sun.
4. All of the above
Answer: A
The sentence “A good writer will only use big words when necessary.” provides an example of effective diction. Good writers understand that fancy words are often distracting and condescending. Avoid using overblown vocabulary unless you are writing the next Great American novel.
Question: 95
A 2.2 kg object is sliding across a smooth surface. If the net force acting on the
object is 1.6 N to the right, what is the acceleration of the object?
1. -3.52 m/s2to the left
2. -0.73 m/s2to the right
3. 3.52 m/s2to the left
4. 0.73 m/s2to the right
Answer: D
The acceleration of a 2.2 kg object sliding across a smooth surface with a net force of 1.6 N to the right acting on it is 0.73 m/s2 to the right. Solution Use Newton’s Second Law S F = ma Where S F = net force = 1.6 N to the right m = mass = 2.2 kg a = acceleration S F = ma, so a = S F/m a = 1.6 N / 2.2 kg 1 N = 1 kgm/s2, so a = (1.6 kg m/s2)/2.2 kg = 0.73 m/s2
Question: 96
Which of the following type of error is least likely to affect the measured value
for a horizontal angle?
1. Instrument
2. Environment
3. Terrain
4. Personnel
Answer: C
Terrain errors are the least likely type of errors affecting the measured value for a horizontal angle when compared to the other listed error types. The impact of instrument errors can be mitigated by properly adjusting the devices used and by using systematic observation procedures. Environmental errors affecting horizontal angle measurement may be due to temperature differentials and the horizontal refraction of the line of sight. Personnel errors can be prevented through proper training and following standard procedures.
Question: 97
Which of the following scenarios can be modeled mathematically?
1. Flow of water through a watershed
2. Migration of a pollutant through a groundwater aquifer
3. Dispersion of particulates through the air
4. All of the above
Answer: D
All of the scenarios listed can be modeled mathematically. With technology available today, engineers and planners are able to model the flow of water, migration of pollutants, and dispersion of particulates through air. Mathematical models can be built using specialized computer software linked to geographic information systems and real-time sampling equipment. These models can be used for predictive forecasting, planning, and mitigation purposes.
Question: 98
For which of the following is a Digital Terrain Modeling (DTM) application most
useful?
1. Planning flight lines
2. Generating high quality cartographic contours
3. Setting slope stakes
4. All of the above
Answer: B
Of the answers listed, Digital Terrain Modeling is most useful for generating high quality cartographic contours. DTMs are digital representations of a portion of the Earth’s surface. The input data, data models, and algorithms required to generate
a digital model of a terrain’s surface are significantly different from those needed to represent planimetric data. For example, most DTM data is derived from a combination of ground surveys, photogrammetric resources, digitized cartographic data, and altimetry data.
Question: 99
Cross-section measurements were taken at 100 ft intervals along a proposed roadway alignment. The cross-sectional areas of the material above the proposed
roadway elevation shown in two consecutive sections were found to be 420 sqft and 332 sq ft. What is the approximate volume (in cubic yards) of the material that will need to be excavated between the two cross-sections?
A. 1,393
B. 12,640
C. 37,600
D. None of the above
Answer: A
The approximate volume of the material that will need to be excavated between the two cross-sections is 1,393 cubic yards. Solution Use the volume equation averaged over the two cross-sections v = L (A1 + A2)/2 Where L = length = 100 ft A1 = 420 sqft and A2 = 332 sqft V = (100 ft) (420 ft2 + 332ft2) / 2 = 37,600 ft3
= 37,600 ft3 x (1 cubic yard/ 27 ft3) = 1,393 cubic yards (approximate)
Question: 100
What is the sum of the exterior angles of an eight-sided traverse?
A. 180°
B. 1,440°
C. 1,800°
D. None of the above
Answer: C
Use the sum of exterior angles of a polygon equation: S = (n+2) x 180° Where n = 8 S = (8+2) x 180° = 1,800°

User: Allan***** I am proud to announce that I passed the ncees-fe exam with an 88% score. The exam was challenging, but thanks to Killexams.com Questions and Answers and Exam Simulator, I was well-prepared. Their exam simulator is truly a gift, and I appreciated the format of the questions and answers. I found this approach to be the most effective way of studying.

User: Antonella***** Due to my limited time, I searched for a smooth way out before the NCEES-FE exam. I stumbled upon killexams.com question and answers, which made my day. The quick and pointed answers to all the likely questions helped me grasp the topics in a short time, and I was pleased to secure accurate marks in the exam. The materials were also easy to memorize, and I am inspired and satisfied with my result.

User: Rostisla***** Even though the ncees-fe exam was the toughest exam I have ever encountered, I did not give up. After failing it miserably, I added Killexams.com to my study schedule and started practicing on their exam simulator and actual exam questions. I believe this is what helped me pass it the second time around. I regret wasting my time and money on unnecessary materials and wish I had discovered Killexams.com earlier.

User: Anthony***** I thank killexams.com practice tests for helping me achieve a 91% score on the EC exam with just 12 days of preparation. Their guide was invaluable, and I wish them all the best for their future endeavors.

User: Orel***** I had taken the NCEES-FE preparation from killexams.com, as that was the best platform for preparation. It gave me the quality level of preparation, which helped me get 92% marks in the NCEES-FE exam. I am extremely happy about the system I received, which made my preparation much less complicated. With the help of killexams.com, I had been prepared to progress well in life.

---