JN0-104 : Junos, Associate (JNCIA-Junos) Exam

JN0-104 Dumps
JN0-104 Braindumps JN0-104 Real Questions JN0-104 Practice Test
JN0-104 Actual Questions
Juniper
JN0-104
Junos, Associate (JNCIA-Junos)
https://killexams.com/pass4sure/exam-detail/JN0-104
Question: 75
Click the Exhibit button.
You must apply the policy shown in the exhibit to readvertise BGP routes to OSPF neighbors Which action will accomplish this task?
1. You must apply the policy as an import policy within the BGP configuration
2. You must apply the policy as an import policy within the OSPF configuration.
3. You must apply the policy as an export policy within the BGP configuration
4. You must apply the policy as an export policy within the OSPF configuration
Answer: D Question: 76 16.100.1/24
Answer: C Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/command- summary/rename.html
Question: 77
Which command allows you to execute operational mode commands while in configuration
mode?
1. activate
2. show
3. run
4. set
Answer: C
Question: 78
You are asked to determine when a Junos device was booted Which command would you use to obtain this information?
1. show system statistics
2. show system commit
3. show system information
4. show system uptime
Answer: D
Question: 79
You are asked to configure a Junos device to perform regular configuration backups
Which feature will you configure under the [edit system) hierarchy to accomplish this task?
1. archival
2. backup-router
3. syslog
4. tracing
Answer: B
Question: 80
Which parameter would you use to prohibit the redistribution of a static route used for management traffic?
1. no-readvertise
2. discard
3. reject
4. passive
Answer: A
Question: 81
Which two statements about routing policies are correct? (Choose two.)
1. An import policy is used to control incoming traffic on a specific interface.
2. An export policy determines the routes in the local routing table that are advertised to peers.
3. An import policy is used to control routes that are accepted by the local routing table.
4. An export policy is used to control outgoing traffic on a specific interface.
Answer: B,C
Question: 82
Which two statements about exception traffic processing are correct? (Choose two.)
1. When congestion occurs, only exception traffic is given preference.
2. By default, a rate-limiter for exception traffic exists on the internal link between the control plane and the forwarding plane
3. When congestion occurs, local and control traffic are given preference.
4. By default, no rate-limiter for exception traffic exists on the internal link between the control plane and the forwarding plane.
Answer: B,C
Question: 83
180.192.120/28?
A. 114.180.192.118/28 B. 114.180.192.100/28 C. 114.180.192.112/28 D. 114.180.192.106/28
Answer: C
Question: 84
Which two types of traffic are processed by the Routing Engine (RE)?
1. IP packet with the IP Options field
2. time-to-live (TTL) expired messages
3. ICMP destination unreachable messages
4. OSPF update messages
Answer: B,C
Question: 85
You must recover a device by loading the rescue configuration file. In this scenario, which command will accomplish this task?
1. {master:0}[email protected]> load override rescue
2. {master:0}[email protected]> rollback rescue
3. {master:0} [edit] [email protected] load override rescue
4. {master:0} [edit] [email protected]# rollback rescue
Answer: B
Question: 86
You must configure the 2bfc:0000:0000:beef:0217:cbff:0000:5c85 IPv6 address on your device.In this scenario, which three addresses are correct? (Choose three.)
A. 2bfc::beef:217:cbff:0:5c85
B. 2bfc:0:0:beef:0217:cbff:0:5c85
1. 2BFCnBEEF:0217:CBFF:0:5C85
2. 2bfc:0:beef:0217:cbff:0:5c85
3. 2BFC::BEEF:217:CBFF::5C85
Answer: A,B,C
Question: 87
Which statement describes the ulst next-hop type that appears in the output of the show route forwarding-table command?
1. A list of unicast or multicast forwarding entries waiting to be resolved.
2. A list of unicast destination prefixes for which packets will be silently discarded
3. A list of unicast next hops used for a given destination for which load balancing is enabled
4. A list of unicast or multicast destination prefixes for which packets will be silently discarded.
Answer: C
Question: 88
Click the Exhibit button,
You are creating a new routing policy on your Junos device. You are currently receiving multiple routes within the 10.10. 10.0/24 subnet from the same upstream BGP neighbor. Your policy should only allow the 10.10. 10.0/24 route and reject all other routes within that
/24 range Referring to the exhibit, which route filter match type would satisfy this requirement?
1. exact
2. orlonger
3. prefix-length-range /24-/32
4. longer
Answer: D
Question: 89
Which command will replace the entire candidate configuration with the configuration stored in the reset. config file?
1. load replace reset.config
2. load override reset.config
3. load merge reset.config
4. rollback 1
Answer: B
Question: 90
What are two benefits of class of service (CoS)? (Choose two.)
1. CoS can increase the performance of a slow network.
2. CoS can manage traffic congestion
3. CoS can prioritize latency-sensitive traffic
4. CoS can increase network bandwidth.
Answer: B,C
Question: 91
Which statement is correct regarding exception traffic on Junos devices?
A. The Junos OS does not provide congestion control for exception traffic sent to the R
1. The built-in rate limiter for exception traffic is configurable.
2. All exception traffic destined for the RE is sent over the out-of-band management link.
3. The Junos OS has a built-in rate limiter for exception traffic.
Answer: D
Question: 92
Click the Exhibit button
You are connecting to a new device in your network and are presented with the information and prompt shown in the exhibit
Which three steps must be carried out to edit the configuration on this device? (Choose
three.)
1. Type configure at the > prompt.
2. Log in using the root user with no password.
3. Type cli at the = prompt
4. Type cli at the > prompt
5. Log in using the root user with the root 123 password.
Answer: A,B
Question: 93
Which two statements about the configure exclusive command are correct? (Choose two.)
1. The command excludes other users from editing the configuration.
2. The command retains all uncommitted changes when exiting exclusive mode
3. The command causes the loss of all uncommitted changes when exiting exclusive mode
4. The command allows multiple users to edit private copies of the configuration concurrently.
Answer: A,C
Question: 94
Click the Exhibit button.
Referring to the exhibit, if the router forwards traffic destined for 192.168.77.29, which next hop will be used?
A. 10.10.1.2
B. 10.10.11.2
C. 10.10.0.2
D. 10.10.20.2
Answer: C
Question: 95
Which operational mode command will provide real-time usage statistics for the ge-0/0/0
interface?
1. show interfaces ge-0/0/0 extensive
2. monitor interface traffic
3. show interfaces statistics
4. monitor traffic interface ge-0/0/0
Answer: B

User: Roy***** One of the best features of killexams.com question bank is the explanations provided with the answers. These explanations helped me understand the subject conceptually, and I was able to pass the JN0-104 exam with a score of 90%. I am grateful to the team for making it easy for me to succeed.

User: Kirill***** I rank very high amongst my peers, and I credit my success to Killexams.com. Their performance analysis software helped me become a member of the high ranks, along with other brilliant students. I found their resources to be specific, great, and beneficial, including their jn0-104 PDF, jn0-104 practice tests, and jn0-104 books. I am thankful to Killexams.com and am writing these words of appreciation because they deserve it.

User: Aria***** When I used Killexams.com for my jn0-104 exam for the first time, I did not know what to expect. But, to my surprise, the site exceeded my expectations. The learning engine and practice tests work wonderfully, and the questions are valid. By valid, I mean that they are actual exam questions, and I saw many of them on my actual exam. I have a good impression of this site and would not hesitate to recommend it to my colleagues.

User: Tasya***** Thanks to Killexams.com practice test for jn0-104, I feel confident and prepared to take the exam. In the past, I used to lack self-assurance when preparing for tests, but now I am amazed at the progress I have made. If you are struggling with self-perception, I highly recommend registering with Killexams.com and starting your training. You will end up feeling confident and ready to succeed.

User: Timothy***** I am pleased to announce that I have passed my JN0-104 exam with ease. While the question bank from killexams.com did not fully cover all the questions asked during the exam, it did help me prepare and become technically sound with the material. Thank you, killexams.com, for helping me pass my JN0-104 exam with flying colors.

---