DES-1121 : Specialist - Implementation Engineer, PowerMax and VMAX Family Solutions Certification Exam

DES-1121 Dumps DES-1121 Braindumps
DES-1121 Real Questions DES-1121 Practice Test DES-1121 Actual Questions
killexams.com
DELL-EMC
DES-1121
Specialist - Implementation Engineer, PowerMax and VMAX Family Solutions Certification
https://killexams.com/pass4sure/exam-detail/DES-1121
Question: 155
Where are the Host l/Os directed to when the Storage Group is in a Non-Disruptive Migration CutoverReady state?
1. Source array only
2. Held in host cache
3. Source and target arrays
4. Target array only
Answer: D Question: 156
Two PowerMax arrays have been configured for replication using SRDF During a disaster recovery operation production has been transferred to the R2 devices at the target site.
Which operation begins the transfer of accumulated invalid tracks from the R2s to the R1s while production work continues on the R2s?
1. Update
2. Fallback
3. Resume
4. Failover
Answer: B Question: 157
A systems administrator is performing a configuration change on a PowerMax array. Where does the configuration manager perform the change?
1. Host which performs the change
2. MMCS
3. Disk drives
4. SYMAPI
Answer: D Question: 158
Which Unisphere for PowerMax client connection authentication type is irrevocable once it is selected?
1. LDAP - SSL
2. Multi-factor Authentication
3. x.509 Common/Principal Name
4. Windows AD Domain-based
Answer: B
Question: 159
A host is connected to two PowerMax arrays with SRDF/Metro Host l/Os cannot be delivered across the SRDF link. The devices in the SRDF group have been forced into a Not Ready state to the host.
Which attribute is set on the SRDF group to cause this behavior?
1. Local Link Domino
2. Local Auto Link Recovery
3. Update After Resume Link
4. Limbo Period
Answer: A Question: 160
Which Open Replicator device type resides on the array running Open Replicator?
1. Donor
2. Local
3. Control
4. Remote
Answer: B Question: 161 Exhibit.
Which activity needs to be performed prior to the operations shown in the exhibit?
1. TTL setting should be changed
2. Snapshot should be terminated
3. Target volumes should be unmounted
4. Target volumes should be unmapped
Answer: C
Question: 162
When creating SRDP groups, what is always identical on both the participating arrays?
1. Port speed
2. Name of the SRDF group
3. SRDF group number
4. SRDF Directors
Answer: C Question: 163
What is the largest TDEV PowerMaxOS 5978 can create?
1. 16 TB
2. 32 TB
3. 64 TB
4. 128 TB
Answer: C Question: 164
Which SYMCLI command can be used to create a new TDEV and assign it to a Storage Group in one step?
1. symdev
2. symsg
3. symcfg
4. symaccess
Answer: B Question: 165 DRAG DROP
An RDF group on a VMAX3 array is being replicated in SRDF/A mode to a remote VMAX3 array. To accommodate application growth a new R1 device needs to be added to the RDF group SRDF/A consistency of the existing devices in the RDF group should be maintained when the new device is added.
What is the correct sequence of steps for adding the new R1 device and making it available for application use?
wrong
Answer: B Question: 166
How does Solutions Enabler use Gatekeepers to pass commands to the PowerMax array?
1. Automatically creates the Gatekeeper and unlocks the device. Processes the system commands; locks and deletes the Gatekeeper
2. Obtains the Gatekeeper and locks the device. Processes the system commands and unlocks the device
3. Obtains the Gatekeeper and unlocks the device Processes the system commands and locks the device.
4. Automatically creates the Gatekeeper and locks the device Processes the system commands; unlocks and deletes the Gatekeeper.
Answer: B Question: 167
From an application perspective what should be done prior to performing an SRDF Fallback operation?
1. Continue accessing the R2 devices
Start accessing the R1 devices before running the command
2. Stop accessing the R2 devices
Run the command and then start accessing the R1 devices
3. Stop accessing the R2 devices
Start accessing the R1 devices before running the command
4. Continue accessing the R2 devices
Run the command and then start accessing the R1 devices
Answer: B Question: 168
A VMAX3 array has been configured with two Storage Resource Pools (SRP) Source volumes are assigned to SRP_1 and target volumes are assigned to SRP_2. A TimeFinderSnapVX snapshot of the source volumes is linked to the target volumes in the default mode
What will happen when there are new host writes to the source volumes?
1. Snapshot deltas will be stored in the Reserved Capacity of SRP_1
2. Snapshot deltas will be stored in SRP 2
3. Snapshot deltas will be stored in the Reserved Capacity of SRP_2
4. Snapshot deltas will be stored in SRP_1
Answer: A Question: 169
A PowerMax administrator is provisioning their environment using Solutions Enabler 9.0 and Unisphere for
PowerMax Two large Storage Resource Pools (SRPs) have been configured for virtual provisioning. The pools are setup with RAID 5 (7+1) TDATs and there are no errors
The administrator is able to fully access and browse each pool's elements and decided to make some modifications to the pools However, they are unable to edit or make any changes to the pool attributes.
What is the most likely reason for this issue?
1. An unsupported version of Solutions Enabler was used
2. Pool modification is restricted to only Dell Technologies personnel
3. One of the SRPs is not configured as the default SRP
4. An unsupported version of Unisphere for PowerMax was used
Answer: B Question: 170
What is the maximum number of systems controlled by Unisphere 360?
1. 64
2. 100
3. 128
4. 200
Answer: D

User: Luna***** I have recently acquired my DES-1121 certificates after passing the exam with Killexams.com assistance. I have completed all my certifications with them, and I cannot imagine taking an exam without their guidance. The fact that I keep coming back to them for their bundles is evidence that I am satisfied with their exam solutions. It is incredible to be able to practice on my PC, in the comfort of my home, with questions that are very similar to what I saw on my exam simulator. Thanks to Killexams.com, I have reached the professional stage, and I am grateful for their support.

User: Dylan***** Initially, I faced some file errors after paying for the DES-1121 exam simulator and practice tests, but they later corrected the errors. I prepared for the exam using the exam simulator, and it worked perfectly fine.

User: Tatyana***** When I was preparing for my DES-1121 exam, I struggled with the books, as the explanations were too elaborate, and the examples were too tough. As a result, I failed the test twice. However, my best friend suggested that I try using the questions and answers provided by killexams.com, and I am so grateful that I did. The quality of the content was excellent, and I found it easy to understand the topics. I was able to cram the material and answer the questions within 180 minutes, and I felt elated to pass the exam. Thanks, killexams.com practice tests, and thanks to my lovely friend too.

User: Tiane***** Thanks to Killexams.com extraordinary practice tests test materials, I passed my DES-1121 exam within two weeks with a score of 96%. I am now very confident that I will do better in my remaining three exams and will honestly use the practice practice test and recommend it to my pals. Thank you very much for your great

User: Ella***** Preparing for the des-1121 exam was a pleasant experience for me, and thanks to Killexams.com Questions and Answers, I have found a way to pass all the further stages easily. Their extensive questions and answers made it easy for me to plan my study schedule even with limited time. The assistance from Killexams was invaluable in my exam preparation.

---