API-571 : Corrosion and Materials Professional Exam

API-571 Dumps
API-571 Braindumps API-571 Real Questions API-571 Practice Test
API-571 Actual Questions
killexams.com
API
API-571
Corrosion and Materials Professional
https://killexams.com/pass4sure/exam-detail/API-571
Question: 285
With steam blanketing, failure occurs as a result of in the tube from the internal steam pressure at the elevated temperature.
A . Stress risers B . Velocity
C . Hoop stress
D . Tensile strength
Answer: C
Question: 286
Carbon dioxide corrosion results when CO² dissolves in water to form acid. A . Sulfuric
B . Hydrochloric C . Carbonic
D . None of the above
Answer: C
Question: 287
Protection in a boiler from boiler feed water corrosion is accomplished by: A . Injecting chlorines to kill microbiological bugs.
B . Injecting caustic to lower the ph to < 4.0.
C . Lowering solids content in boiler feed water to less than 50 ppm. D . Maintaining a protective corrosion layer of magnetite (Fe3O4).
Answer: D
Question: 288
Susceptibility to hydrogen stress cracking with hardness. A . Increases, increasing
B . Decreases, increasing C . Decreases, Decreasing D . Both A and C
Answer: D
Question: 289
With sour water corrosion, corrosion increases with NH4HS concentration and velocity. A . Increasing, Decreasing
B . Increasing, Increasing C . Decreasing, Decreasing D . Decreasing, Increasing
Answer: B
Question: 290
is the main concern during start-up, shutdown and/or hydro testing for equipment/piping operating at elevated temperatures. This event can also occur in an auto refrigeration event in units processing light hydrocarbons. A . Stress fracture
B . Carburization C . Spheroidization D . Brittle fracture
Answer: D
Question: 291
With creep, increased stress due to loss in thickness from corrosion will time to failure. A . Increase
B . Reduce
C . Not affect
D . None of the above
Answer: B
Question: 292
With hydrofluoric acid corrosion, corrosion rates increase with temperatures and HF concentrations. A . Increasing, decreasing
B . Decreasing, increasing C . Increasing, increasing D . Decreasing, decreasing
Answer: A
Question: 293
To prevent hydrogen embrittlement, use lower strength steels and to temper the microstructure, improve
ductility and reduce residual stresses. A . Alloys
B . Preheat C . PWHT
D . All of the above
Answer: C
Question: 294
The level of creep damage is a function of the material and the coincident level at which the creep deformation occurs.
A . Pressure/Temperature B . Pressure/Stress
C . Temperature/Stress D . None of the above
Answer: C
Question: 295
A form of corrosion that can occur at the junction of dissimilar metals when they are joined together in a suitable electrolyte is .
A . Galvanic corrosion B . Anodic corrosion C . Cathodic corrosion D . All of the above
Answer: A
Question: 296
The primary factors affecting high temperature oxidation are metal temperature and . A . Pressure
B . Alloy composition C . Stress
D . Oxygen
Answer: B
Question: 297
Sulfuric acid promotes general and localized corrosion of carbon steel. Carbon steel heat affected zones may experience severe corrosion. Acid concentration, temperature, alloy content and are critical factors affecting sulfuric acid corrosion.
A . Pressure
B . Stress
C . Velocity D . Ductility
Answer: C
Question: 298
Which of the following materials is affected by high temperature corrosion? A . Carbon steel
B . 300 Series SS C . 400 Series SS
D . All of the above
Answer: D
Question: 299
Many thermal fatigue cracks are filled with: A . chlorides.
B . hydroslime. C . oxides.
D . sulfides.
Answer: C
Question: 300
Ammonium chloride corrosion is the general or localized corrosion, often pitting, normally occurring under ammonium chloride or amine salt deposits. All commonly used materials are susceptible to ammonium chloride corrosion. A small amount of can lead to very aggressive corrosion.
A . Ammonium chloride B . Amine
C . Water D . Salt
Answer: C

User: Susie***** Unlike other unreliable online resources, Killexams.com provides accurate and valid questions that are crucial for exam success. My first attempt at the api-571 exam failed because I used unverified materials. However, after switching to Killexams.com’s exam simulator, I passed with flying colors. Their resources are truly dependable.

User: Omar***** Passing the api-571 exam on my first attempt was a testament to killexams.com’s reliable testprep materials. Their expert team crafted a superior question bank compared to others in the market, ensuring a confident performance. I am excited to use their resources for future exams and wholeheartedly thank them for their outstanding support.

User: Tashina***** Killexams.com restored my confidence for the API-571 exam, helping me pass with ease through their tailored testprep materials. The straightforward study resources made learning quick and effective, aligning perfectly with my needs. I highly recommend their platform to anyone seeking a reliable and efficient path to API-571 certification.

User: Kseniya***** I am pleased to say that I obtained 89% on the API-571 exam thanks to Killexams.com practice tests. Memorizing all the questions through their exam simulator was truly the best move I made. I sincerely appreciate the Killexams.com team for their outstanding support.

User: Tama***** Achieving a happy future requires hard work and determination. However, hard work alone is often not enough; one needs a reliable path to guide them towards their goals. Fortunately, during my preparation for the api-571 exam, I stumbled upon Killexams.com, which turned out to be the perfect guide towards my future success. With the help of Killexams.com and its dedicated teachers, I was able to receive the necessary materials to pass my exam with flying colors.

---