199-01 : Riverbed Certified Solutions Exam

199-01 Dumps
199-01 Braindumps
199-01 Real Questions
199-01 Practice Test
199-01 Actual Questions


Riverbed
199-01
Riverbed Certified Solutions
https://killexams.com/pass4sure/exam-detail/199-01
Answer: A, B, D
QUESTION: 328
TCP-over-IPv6 traffic is not optimized although you have enabled packet-mode
optimization and restarted the optimization service. What could be causing this
issue? (Select 2)
A. You need to configure in-path rules for the traffic you wish to optimize on the
client-side Steelhead appliance.
B. in-path rules are bidirectional and only need to be configured on the client-side
Steelhead appliance.
C. You need to configure in-path rules for the traffic you wish to optimize on the
server-side Steelhead appliance.
D. You need to configure auto-discovery in-path rules for the traffic you wish to
optimized on the server-side Steelhead appliance.
E. It is not possible to optimize TCP-over-IPv6 traffic with packet-mode
optimization.
Answer: A, C
QUESTION: 329
What is required for the Embedded Cascade Shark function to work? (Select 3)
A. TCP port 61898 should be open between the Steelhead and the remote Cascade
Pilot.
B. You must give the username Shark a password.
C. You must enable Cascade Shark on the Management Console TCP Dumps menu.
D. The optimization service needs to be restarted.
Answer: A, B, C
QUESTION: 330
How can you verify that encrypted Lotus Notes traffic is correctly optimized?
A. Looking at the Current Connections report for a successful connection that should
appear as NOTES-ENCRYPT.
B. Double checking that encrypted Lotus Notes is enabled.
C. Restarting the service.
D. Looking at the Current Connections report for an unsuccessful connection that
should appear as NOTES-ENCRYPT.
Answer: A
QUESTION: 331
What type of problem does the error message below indicate:
Sep 13 03:50:51 SH alarmd[18371]: [alarmd.NOTICE]: Alarm 'admission_mem'
triggering Sep 13 03:50:51 SH alarmd[18371]: [alarmd.NOTICE]: Alarm
'admission_control' triggering
Sep 13 03:50:51 SH alarmd[18371]: [alarmd.NOTICE]: Alarm 'health' severity
changed to 'Admission Control'
A. High CPU Utilization
B. Paging alarm
C. Admission control on connections
D. Admission control on memory
E. Admission control on system
Answer: D
QUESTION: 332
What type of problem does the error message below indicate:
Aug 30 18:19:27 SH pm[18716]: [pm.ERR]: Output from sport:
/opt/rbt/bin/sport (pid 11304) received signal 6 (SIGABRT) dumping core
A. It is not a problem, but part of the regular operation
B. The management process crashed
C. The optimization process crashed
D. The management process received permission to connect to a Granite Core device
E. The sport process received permission to connect to a Granite Core device
Answer: C
QUESTION: 333
What type of problem does the error message below indicate:
Sep7 22:53:50 SH pm[18184]: [pm.NOTICE]: Output from sport:
/opt/rbt/bin/sport (pid 27529) received signal 12 (SIGUSR2) marking bit
A. It is not a problem. The message is displayed when a system dump is generated.
B. The management process crashed
C. The optimization process crashed
D. The management process received permission to apply QoS marking
E. The sport process received permission to apply QoS marking
Answer: A
QUESTION: 334
Citrix optimization does not work although you removed ports 1494 and 2598 from
the Interactive Ports label and enabled Citrix optimization on the client-side
Steelhead appliance. What could be the problem? (Select 2)
A. You need to enable Citrix optimization on the server-side Steelhead appliance.
B. Secure ICA encryption needs to be enabled.
C. Citrix CDM optimization needs to be enabled.
D. You need to restart the optimization service.
Answer: A, D
QUESTION: 335
Citrix remote applications, running on the server and to access printers and disk
drives, are not performing well. What can you configure to improve the
performance?
A. Enable Citrix CDM optimization.
B. Enable SecureICA encryption.
C. Session Reliability (CGP) Port.
D. Enable Citrix Traffic Fallback Behavior.
Answer: A
QUESTION: 336
After completing the SRDF configuration on both Steelhead appliances and
restarting the optimization service, the SRDF connections in the Current
Connections report show a red protocol error icon in the Notes column. What could
be a cause of this issue?
A. A SRDF protocol error can occur when attempting to optimize traffic originating
from the LAN-side of the Steelhead appliance. Please check the LAN-side
Symmetrix array for compatibility.
B. The red icon indicates that RiOS is optimizing the connection normally.
C. A SRDF protocol error can occur when attempting to optimize traffic originating
from the WAN-side of the Steelhead appliance. Please check the WAN-side
Symmetrix array for compatibility.
D. Symmetrix needs to be enabled on the EMC server.
Answer: A
QUESTION: 337
On Steelheads, by default tcpdump:
A. captures packets with an 802.1Q tag.
B. does not capture packets with an 802.1Q tag
C. does not capture packets with an 803.3Q tag.
D. does not capture packets with an 802.11Q tag.
Answer: B
QUESTION: 338
Authentication fails for certain users after configuring the Server-Side Steelhead
Appliance to be a RODC. What could be the issue?
A. These users make use of NTLM authentication.
B. These users exclusively make use of Kerberos authentication.
C. Overlapping open is enabled.
D. SMB signing is required.
Answer: B
QUESTION: 339
In a virtual-inpath deployment, when the Steelhead appliance exports data to a flow
data collector:
A. All traffic has the LAN and WAN interface index.
B. All traffic has the WAN interface index.
C. All traffic has the LAN interface index.
D. All traffic has the primary interface index.
Answer: B
QUESTION: 340
On the Interceptor appliance, connection tracing feature enables you:
A. To determine to which Interceptor appliances the Virtual Steelhead appliance has
redirected specific connections.
B. To determine to which Interceptor appliances the Steelhead appliance has
redirected specific connections.
C. To determine to which Steelhead appliances the Interceptor appliance has
redirected specific connections.
D. To determine to which Mobile Controller the Interceptor appliance has redirected
specific connections.
Answer: C
QUESTION: 341
While performing a health check for a Steelhead appliance at a remote site, you
noticed some of the pass-through traffic should have been optimized. The pass-
through reason for the suspicious traffic is "SYN on WAN side". Upon further
investigating, you also noticed that all of the traffic initiated at the data center is
pass-through while all of the traffic initiated at the remote site is optimized. There is
only one path between the data center and the remote site and both Steelhead
appliance are physically in-path. What are the possible causes? (Select 2)
A. There is a pass-through in-path rule configured on the data center Steelhead
appliance.
B. There is a pass-through in-path rule configured on the remote site Steelhead
appliance.
C. There is a pass-through peering rule configured on the data center Steelhead
appliance.
D. The LAN and WAN interfaces on the data center Steelhead appliance are
reversed.
E. The LAN and WAN interfaces on the remote site Steelhead appliance are
reversed.
Answer: A, D
QUESTION: 342
After installing a Steelhead appliance at a remote site, users started complaining
about some optimized applications being slower. After some initial investigating,
you discovered a backup job was consuming most of the bandwidth causing
congestion. You also found that QoS is configured on the router and should have
prevented this but it did not. What is the most likely cause?
A. Simplified routing is not enable on the remote Steelhead appliance.
B. Simplified routing is not enable on the data center Steelhead appliance.
C. Asymmetric routing.
D. QoS on the router identifies traffic using destination IP and ports while the
Steelheads are configured to use correct addressing.
E. QoS on the router identifies traffic using destination IP and ports while the
Steelheads are configured to use full transparency.
Answer: D

User: Virginia***** Passing the 199-01 exam seemed impossible for me as I could not manage my study time well. With only 10 days left, I referred to the exam using Killexams.com, and it made my life easier. The subjects were provided correctly and were dealt with nicely within the test. I scored a suitable 959. Thanks, Killexams. I was hopeless, but Killexams.com gave me the desire and helped me pass the exam. I owe my success to you.

User: Júlia***** After feeling unconfident in the 199-01 area, a friend recommended the Killexams Riverbed bundle to me a few days before the exam. I wish I had purchased it earlier, as it would have made things much simpler. However, I am grateful for the preparation materials as I ended up passing the 199-01 exam with ease.

User: Khalid***** Preparing for 199-01 exams can be challenging, and it is highly likely that you will fail without proper guidance. This is where the best 199-01 study material comes in handy. It provides you with efficient and relevant information that not only enhances your preparation but also increases your chances of passing the 199-01 exam and getting into any university. I prepared using this fantastic program and scored 42 out of 50. I assure you that it will not let you down.

User: Makara***** After failing my 199-01 exam, I turned to the Internet and found Killexams.com. The website had the practice tests I needed to pass the exam in no time. I bought the 199-01 practice pack, which included questions, answers, and an exam simulator. I took the exam and scored 98%, all thanks to the Killexams.com team.

User: Nora***** I used the killexams.com practice test to prepare for the 199-01 exam in Romania, and I got 98%. All the questions I got on the exam were exactly what killexams.com had provided in their brain dump practice test, which is incredible. I highly recommend this to everyone who is going to take the 199-01 exam.

---