Network-Appliance NS0-520 Questions & Answers

Full Version: 133 Q&A

Latest NS0-520 Exam Questions and Practice Tests 2025 - Killexams.com

NS0-520 Dumps NS0-520 Braindumps

NS0-520 Real Questions NS0-520 Practice Test NS0-520 Actual Questions

Network-Appliance

NS0-520

NetApp Certified Implementation Engineer SAN, ONTAP

https://killexams.com/pass4sure/exam-detail/NS0-520

You have an SVM serving LUNs to your VMware environment. You have configured the SAN LIFs, zoning, and multipath by using industry best practices. You need to temporarily migrate a SAN LIF to another host, preserving the SAN LIF’s WWPN. You do not want to lose access to the LUNs during LIF migration.

In this scenario, what are three required steps that are needed to accomplish this task? (Choose three.) A . Set the new home node and home port in the LI

C . Take the LIF offline. D . Bring the LIF online.

E . Update the zone using the WWPN of the destination host’s physical port. F . Nondisruptively migrate the LIF to the destination host.

Answer: ABC

An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.

After rehosting the volume, what are two policies that must be reconfigured? (Choose two.) A . export policy

B . caching policy

C . volume efficiency policy D . snapshot policy

Answer: CD

Click the Exhibit button.

A customer has a 4-node AFF A700 cluster that uses ONTAP 9.7. The customer’s environment has the Emulex

LP31004-M6 and Emulex LPe32002-M2 HBAs.

Referring to the exhibit, using the NVMe protocol, which two host operating systems would be supported? (Choose two.)

A . SLES 15 64-bit

B . SLES 12 SP3 64-bit

C . Microsoft Windows Server 2012 R2 D . RHEL 7.5 64-bit

Answer: AB

Click the Exhibit button.

Referring to the exhibit, which switch in the fabric is the principal switch? A . sw10

B . sw6 C . sw4 D . sw5

Answer: B

An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server. After the administrator performs a rescan, the LUN is not visible on the host.

Which statement describes how to solve this problem?

A . Create an igroup, add the iSCSI IQN, then map the LUN to the igroup. B . Enable ALUA support on the VMware host.

C . Perform a takeover/giveback of the controller that is hosting the LU

E . Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.

Answer: A

Click the Exhibit button.

Referring to the exhibit, how many LUNs should the server administrator see on the Windows 2016 host?

0
4
2
8

Answer: C

Click the Exhibit button.

An administrator enabled the FC protocol on an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.

Referring to the exhibit, which two steps must the administrator take to solve this problem? (Choose two.) A . Enable NPIV on the switch.

B . Create an igroup, add the iSCSI IQN, and then map the igroup to the LU D . Disable NPIV on the switch.

E . Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LU

Answer: AD

You have a 2-node AFF A400 serving FC LUNs. You are asked to make an instant-writable copy of a LUN in a deduplicated volume. The writable copy must not take additional space.

In this scenario, which two ONTAP features would be used? (Choose two.) A . clone split

B . volume clone C . LUN move D . file clone

Answer: BD

A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7. In this scenario, which action is required?

Load the FC HBA drivers.
Set up the Red Hat auto mounter.
Load the Ethernet drivers.
Set up ALUA.

Answer: A

An administrator suspects abnormal operation and performance-related issues within a particular SAN environment. The administrator wants to further investigate the environment in terms of overall health, best practice recommendations, proactive remediation, and risk assessments, as compared to other SAN deployments.

Which tool should the administrator use to assess this information? A . Active IQ

B . Active IQ OneCollect

C . Active IQ Config Advisor

D . Interoperability Matrix Tool (IMT)

Answer: C

You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.

Which tool enables you to confirm that this will be a valid addition? A . Active IQ OneCollect

B . Hardware Universe (HWU) C . Active IQ Config Advisor D . Active IQ

Answer: B

You are called to help with a new customer’s SAN environment that consists of an 8-node AFF A700 cluster, Cisco

MDS fabric switches, and Cisco UCS servers.

Which two tools would help you to assess the environment? (Choose two.) A . Active IQ OneCollect

B . Active IQ Upgrade Advisor C . NetApp ONTAP Mediator D . Brocade SAN Health

Answer: AB

A database owner requests that two additional hosts be added to an application server cluster. This brings the host count for the fabric to 10. The company’s internal procedure is to set SAN hosts with a queue depth of 256. The FAS8300 2-node cluster is configured with one HBA per node with one port connected to fabric A and one port connected to fabric B. Users complain about inconsistent performance.

What must the storage administrator do to ensure continuous operation of the hosts in this new configuration? A . Add two more hosts to the application server cluster.

B . Reduce the number of LIFs per node on the FAS8300 cluster. C . Create two additional LIFs per node on the FAS8300 cluster.

D . Reduce the queue depth of the hosts such that the total does not exceed 2048.

Answer: D

You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.

In this scenario, which two actions satisfy the failure criteria? (Choose two.) A . Disable Snapshot policies.

B . Pull an Ethernet cable from a Linux host. C . Perform a storage controller failover.

D . Pull an Ethernet cable from a storage port with a cluster LI

Answer: CD

User: Taniya*****

I answered all questions in the NETAPP CERTIFIED IMPLEMENTATION ENGINEER SAN, ONTAP exam with ease, all thanks to Killexams.com. It is a terrific asset for passing the test, and I advise everyone to use it. I tried several books, but none of them worked for me until I discovered Killexams.com Questions and Answers. The easy-to-understand language and organized questions and answers made it easier for me to plan and prepare for the exam.

User: Atharv*****

The practice tests provided by Killexams.com were fantastic. Even though 76% is enough to pass the exam, I scored 92% marks on the real NS0-520 exam. All credit goes to Killexams.com. Its tough to imagine that I could have passed the exam with any other product. This is an excellent product, and I highly recommend it.

User: Santiago*****

I passed the NS0-520 certification exam with 91% marks, and I owe it to killexams.com practice tests, which are very similar to the real exam. Thank you for your high-quality assistance. I will continue to use your practice tests for my future certifications. I was hopeless about becoming an IT certified, but my friend told me about killexams.com. I used their online tools for my NS0-520 exam preparation and scored 91 in the exam. I owe thanks to killexams.com.

User: Emmanuel*****

I appreciate the hard work that went into developing the exam simulator provided by killexams.com. It helped me pass my ns0-520 exam, and the questions and answers provided by their team were accurate and helpful. With their support, I was able to achieve an excellent score of 78% on my first attempt. I hope that killexams.com continues to achieve great success. Thank you for your assistance.

User: Daniela*****

When it became clear that my work would require me to deal with an ns0-520 client base, I decided to take the initiative and become the office go-to ns0-520 expert. A friend recommended killexams.com ns0-520 demo, which I loved and subsequently purchased. The exam simulator proved to be fantastic, and thanks to killexams.com study kit, I am now the new ns0-520 manager.

Features of iPass4sure NS0-520 Exam

Files: PDF / Test Engine
Premium Access
Online Test Engine
Instant download Access
Comprehensive Q&A
Success Rate
Real Questions
Updated Regularly
Portable Files
Unlimited Download
100% Secured
Confidentiality: 100%
Success Guarantee: 100%
Any Hidden Cost: $0.00
Auto Recharge: No
Updates Intimation: by Email
Technical Support: Free
PDF Compatibility: Windows, Android, iOS, Linux
Test Engine Compatibility: Mac / Windows / Android / iOS / Linux

Premium PDF with 133 Q&A

Get Full Version

All Network-Appliance Exams

Network-Appliance Exams

Certification and Entry Test Exams

Complete exam list