iPass4sure.net

Certification Practice Test | PDF Questions | Actual Questions | Test Engine | Pass4Sure

830-01 : RCPE Certified Professional WAN Optimization Exam

Riverbed 830-01 Questions & Answers

Full Version: 402 Q&A


Latest 830-01 Exam Questions and Practice Tests 2025 - Killexams.com


830-01 Dumps

830-01 Braindumps

830-01 Real Questions

830-01 Practice Test

830-01 Actual Questions


killexams.com


Riverbed


830-01


RCPE Certified Professional WAN Optimization


https://killexams.com/pass4sure/exam-detail/830-01


QUESTION: 193

You are using TCPdumps on the server-side SteelHead to troubleshoot an application connectivity issue. The following filter is used on the TCPdump:

(host <client IP> and host <server IP>) or (host <server IP> and host

<steelheadinpath IP>) or (proto gre and ((ip[40:4] = <hex server IP>

And ip[44:4] = <hex client IP>) or (ip[40:4] = <hex client IP> and ip[44:4] = <hex server IP>)) or (port 7850) What part of the filter captures the traffic which the Interceptor has applied NAT to?


  1. (ip[40:4] = <hex client IP> and ip[44:4] = <hex server IP>)

  2. (host <server IP> and host <steelhead inpath IP>)

  3. (proto gre and ((ip[40:4] = <hex server IP> and ip[44:4] = <hex client IP>)

  4. (host <client IP> and host <server IP>)


Answer: A


QUESTION: 194

A SteelHead is deployed in a VLAN bridge. Which VLAN ID should be configured on the in-path interface to support this environment?



  1. 1

  2. 100

  3. 200

  4. No configuration is necessary as LAN and WAN interfaces are on access ports

  5. It will require an in-path interface for each VLAN


Answer: C


QUESTION: 195

You plan to downgrade a SteelHead from RiOS v9.0.1 (Apr 17 2015) to 8.6.3 (Aug 7 2015). The appliance has not run v8.6.3 previously. Will this be successful?


  1. No, downgrades are only permitted if the target version was previously installed.

  2. No, it is not possible to downgrade RiOS.

  3. Yes, the configuration will be migrated successfully during any downgrade.

  4. Yes, v8.6.3 is a chronologically newer version.


Answer: A


QUESTION: 196

The SteelHead REST API connectivity can be used for which of the following?


  1. To synchronize layer 7 signatures and QoS configurations with the NetProfiler.

  2. To export QoS and other statistics to the SteelCentral Controller for SteelHead (SCC).

  3. To push secure transport configuration from the SCC to the SteelHeads NetProfiler.

  4. To push topology information to the SteelHeads from the SCC for path selection.

  5. To synchronize layer 7 signatures with the NetShark devices.


Answer: B


QUESTION: 197

A customer uses a single URL for a service that uses many servers with different certificates. What SSL options should be enabled to enhance performance?


  1. Passive key derivation

  2. SSL proxy support and SNI (Server name indication)

  3. SSL advanced mode

  4. Early start/late finish

Answer: C


QUESTION: 198

Which deployment options are available to Virtual SteelHead on ESXi?


  1. Physical In-path (with Riverbed bypass NIC)

  2. Virtual In-path

  3. Out-of-path

  4. Server-side Out-of-Path

  5. All of the above


Answer: A, B, C


QUESTION: 199

A SteelHead is running RiOS v8.6 and has an inpath0_0 IP address of 192.168.1.10. It is later upgraded from v8.6 to v9.0. As part of an IT project, the inpath0_0 IP address is changed to 10.10.10.10 and the configuration saved. Some time passes and the administrator decides to revert to RiOS v 8.6. It hasn’t been factory reset. The appliance boots and the Management Console User Interface is reachable, however, optimization no longer works. What has happened?


  1. The web GUI SSL certificate is no longer trusted and the services require a restart.

  2. The licenses are no longer valid and will need to be replaced and the services restarted.

  3. It is not possible to revert to older versions of RiOS and the optimization service has stopped as a precaution.

  4. The configuration has reverted to the one running under v8.6 and the inpath0_0 IP address is back to 192.168.1.10.

  5. The configuration has been lost and the appliance is running factory default settings.


Answer: D


QUESTION: 200

What is the first step in optimizing an SMTPS session?


  1. An unencrypted SMTP connection is intercepted and optimized, before a START- TLS is issued.

  2. START-TLS is issued immediately by the client and intercepted by the client side SteelHead.

  3. SteelHeads do not currently support optimizing SMTPS sessions.

  4. An SSL client HELLO is sent by the client and intercepted by the client side SteelHead.


Answer: A


QUESTION: 201

What is the purpose of ‘Peer Affinity’ on the Interceptor?


  1. To keep similarly sized SteelHead models peering with each other.

  2. To ensure load is distributed evenly throughout the cluster.

  3. To maximize the benefits of SDR by maintaining SteelHead peering relationships.

  4. To ensure asymmetrically routed connections are optimized.

  5. To make sure cluster SteelHeads remain connected to the same Interceptor.


Answer: A


QUESTION: 202

The SteelHead Out of Band splice (OOB) uses which addressing mode? Assume a default configuration.


  1. Always correct addressing.

  2. Depends on which addressing mode the first optimized connection uses.

  3. Always transparent addressing.

  4. Always destination transparency.


Answer: A


User: Catherine*****

After receiving several helpful tips from Killexams.com, I was able to achieve an 88% score in my 830-01 exam. My friend then suggested that I use their practice tests guide as a quick reference for future exams. This guide had short answers that were easy to remember and covered all the necessary material. I decided to use Killexams.com for all my future exams, but I was unsure how to cover all the material in just one week.
User: Lucy*****

The bundle of Killexams.com questions and answers provided me with an awesome result. The questions were correct, and I was able to answer most of them during the exam. After passing, I recommended Killexams.com to my colleagues, and they also passed their exams with ease. I have not heard a single negative review of Killexams, which makes it the best IT training you can find online.
User: Ansh*****

For 830-01 certifications, many materials are available online, but I chose killexams.com 830-01 practice tests. I paid for their questions and answers and could not be happier. They provided real exam questions and answers, and I passed the 830-01 exam without much strain. Their website is user-friendly and reliable, and I highly recommend it to others.
User: Jean*****

In my opinion, Killexams.com is the most accurate and efficient platform for preparing and passing IT tests. They provide you with precisely what you need to know for the 830-01 exam. My acquaintances used Killexams.com for various certifications such as Cisco, Oracle, Microsoft, ISC, and more, and all of them passed with excellent results. In my personal experience, Killexams.com has been reliable and my favorite platform.
User: Sam*****

I want to express my gratitude for your support by buying you a killexams.com mock test for the 830-01 exam, which I passed on my first try with a score of 79%. I cannot thank killexams.com enough for providing such an excellent study resource. Your team is truly wonderful, and I urge you to keep up the good work by updating your questions regularly.

Features of iPass4sure 830-01 Exam

  • Files: PDF / Test Engine
  • Premium Access
  • Online Test Engine
  • Instant download Access
  • Comprehensive Q&A
  • Success Rate
  • Real Questions
  • Updated Regularly
  • Portable Files
  • Unlimited Download
  • 100% Secured
  • Confidentiality: 100%
  • Success Guarantee: 100%
  • Any Hidden Cost: $0.00
  • Auto Recharge: No
  • Updates Intimation: by Email
  • Technical Support: Free
  • PDF Compatibility: Windows, Android, iOS, Linux
  • Test Engine Compatibility: Mac / Windows / Android / iOS / Linux

Premium PDF with 402 Q&A

Get Full Version

All Riverbed Exams

Riverbed Exams

Certification and Entry Test Exams

Complete exam list